Trussed Roof Attic Conversions
Yes, a modern W-shaped trussed roof can be converted.
How to tell in 30 seconds whether your attic has traditional cut rafters or prefabricated W-trusses.
Free, no obligation. One attic conversion company covering your county prices it, not five.
- +€3,000 to €5,500typical structural steel RSJ upgrade for trusses
- Late 1970s+when W-shaped gang-nailed trusses became standard
- 2 steel RSJsusually span from gable to party wall
- Engineer certstructural calculations included
Cut-rafter vs W-truss roofs: what changes on site
| Roof type | Common house era | What you see through the hatch | Structural work needed |
|---|---|---|---|
| Traditional cut-rafter roof | Pre-1975 houses & some one-offs | Heavy 100×50 mm+ rafters, horizontal purlins, clear floor space in the middle | New independent floor joists alongside existing ceiling joists; steel only if purlins move |
| Prefabricated W-trussed roof | Late 1970s to 2020s estate homes | Thin 35 mm timbers in a W pattern every 600 mm with metal gang-nail plates | Two structural steel RSJs (€3,000 to €5,500) from gable to party wall, rafters doubled up, load transferred before cutting webs |
How the steel beams get into your attic without taking the roof off: Attic specialists open a small section of tiles on the rear slope (where the new Velux window will go anyway) or pocket into the gable wall, and crane or winch the steel RSJ sections straight into the roof space in spliced lengths bolted together with engineer-specified splice plates. All structural work happens from inside the attic while your first-floor ceilings stay intact below.
Attic conversion cost & 2026 planning checker
Compare storage, habitable Velux, rear dormer and hip-to-gable prices, and check how the 27 July 2026 Class 1B and Class 1C exemptions apply.
€23,000 to €40,500
Planning: Exempt (rear rooflights; up to 2 front ≤ 100×90 cm under Class 1C) · Full Building Regs
Habitable Velux conversion €20,000 to €35,000, steel RSJ truss upgrade +€3,000 to €5,500 (incl. 13.5% VAT guide). Rear roof windows are exempt, and since 27 July 2026 up to 2 front roof windows (each ≤ 100 × 90 cm) are exempt under Class 1C (S.I. No. 344 of 2026). Includes a TGD K fixed stairs, 30-min fire-resisting stairwell, self-closing fire doors, escape window (≥ 450 mm & 0.33 m²) and Engineer's Opinion on Compliance.
Send this spec for a written quoteEvery attic conversion type and rule explained
Costs, the July 2026 dormer and rooflight exemptions, Building Regulation fire safety and structural steel.
Habitable Velux conversionsBedroom or study inside the existing roof slope (€20,000 to €35,000), with fixed fire-protected stairs and compliance cert.Velux vs dormer guide →
Rear & side dormers (Class 1B)Full standing height and floor space (€28,000 to €45,000); exempt up to 30 m³ since 27 July 2026 under S.I. No. 344 of 2026.Dormer prices & rules →
Hip-to-gable conversionsExtends a sloping side hip into a vertical gable wall (€35,000 to €55,000+) so your new stairs can rise along the side.Hip-to-gable guide →
2026 planning exemptionsSide/rear dormers ≤ 30 m³ (Class 1B) and up to 2 front rooflights ≤ 100×90 cm (Class 1C) explained in plain English.2026 planning rules →
Building Regs & fire doorsLoft Conversion Guidelines 2022: TGD B fire doors, escape windows, TGD K stairs and the 2.4 m height rule.Building Regs guide →
Adding an en-suite bathroomWhere the soil pipe runs, boosted water pressure and placing the shower under the highest part of the ridge (+€5,000 to €8,000).En-suite cost & layout →Real examples and installation detail


Get a fixed attic conversion price with no obligation
Tap the kind of conversion, your house type and your county. Your request goes to one attic conversion company that covers your county, and they ring you to arrange a free loft survey and written quote.
Attic Conversion Cost guides & price breakdowns
Straight answers to what people ask most: itemised costs, specifications, planning or grants, and what to check before you book.
More guides & resources: All guides & calculator hub · Technical & trade glossary · Frequently asked questions · All areas covered · About this site
Questions people ask
How do I know if I have a trussed roof or a cut-rafter roof?
Pop the attic hatch and look up. If the middle of the attic is open and you can walk around between a few heavy timber purlins, you have a traditional cut-rafter roof (common in pre-1975 houses). If the entire space is a forest of thin 35 mm diagonal timbers joined with metal toothed plates every 600 mm in a 'W' shape, you have a trussed-rafter roof.
Is it safe to cut roof trusses for an attic conversion?
Never cut a truss web without installing the replacement steel and timber structure first. On a proper trussed-roof conversion, a structural engineer sizes two steel RSJ beams that sit on concrete padstones in the gable and party wall. New floor joists and structural dwarf walls are built off those steel beams to support the rafters before a single diagonal truss web is cut.
Attic Conversion Cost across all 26 counties
Requests from all 26 counties go to one local specialist who covers your county — from Dublin, Cork, Galway and Limerick to Kildare, Meath, Wicklow, Waterford and Donegal. Pick your county below for local prices, specifications and advice. Compare all areas covered →
Get a fixed written quote for your attic conversion
One specialist covering your county checks your ridge height, roof structure and stairs landing, and gives you a written price.
